Corrosion Resistance Guages, Pressure Gauges, Diaphragm Gauges, Compound Gauges, Vacuum Gauges, Glass Thermometers, Mercury Thermometers, Steel Thermometers, Mcleod Gauges, Rotameter, Level Indicator, U Tube Manometer, Measuring Instruments, India

Products

Electric Alarm & Control Contact


Electric Alarm & Control Contact
1.

 Contact Rating 230V. AC. 0.15 Amps. Blue Pointer for minimum
 contact closes with falling temperature or pressure and contact
 opens with rising temperature or pressure. 'A' is the temperature 
 or pressure indicating pointer.
2.

 Red Pointer for maximum contact. Contact opens with falling
 temperature or pressure and contact closes with rising
 temperature or pressure.
3.

 Red and Blue Pointers for maximum & minimum contact. Blue
 minimum contact B1 closes with falling temperature or pressure.
 Red maximum contact B2 closes with rising temperature or
 pressure. Band of temperature or pressure between B1 and B2
 variable over whole scale range.
4.  Blue and Green pointers both for minimum contacts. Contacts B1
 and B2 close with falling temperature and B2 and B1 open with
 rising temperature or pressure.
5.

 Red and Yellow Pointers both for maximum contacts. Contacts B1
 and B2 close with rising temperature or pressure and B2 and then
 B1 open with falling temperature or pressure.
N.B.  1 to 5 can be fitted with Maximum Reading Pointers.

Temperature & Pressure Recorder


Temperature & Pressure Recorder

'ATLAS' Temperature Recorder works 
on the principle of Mercury-in-steel thermometer.

'ATLAS' Pressure Recorder works on the principle of Bourdon type Pressure Gauges.

RANGES AVAILABLE : 0 to 50°C, 100°C, 150°C, 200°C, 250°C, 300°C, 400°C, 500oC, 600°C, and - 50 
to 300° C.		 CASE  : Pressed Steel
DIAMETER OF CHART : 250 mm. ENTRY : Bottom
CHART  DRIVE : Electrical or Mechanical, Electrical Chart drive for 230 Volts, 50 Cycles AC, Mechanical Drive for 24 hours or 7 days RANGES  AVAILABLE : Oto 1, 2, 2.5, 4, 6, 10, 16, 25, 40, 60, 100, 160 kg / cm2
NUMBER OF PEN : One or two. DIAMETER OF CHART  : 250 mm.
CHART  DRIVE :

Electrical or Mechanical, Electrical chart drive for 230 volts 50 cycles AC. Mechanical drive for 24 hours or 7 days.

 
NUMBER OF PEN : One or two.

  | Back |                                                                                                              | Next |  

Designed & Hosted by : MID   Promoted by : GID